MPT2-6-P10M-333-J-X PRESSURE TRANSDUCER

Description

MPT2-6-P10M-333-J-X;  3.33mV/V output, 0-10,000 PSI Range, 18″ flex cable with 6-Pin connector, 6″ stem length, 1/2-20 process thread, Type J thermocouple

REPLACES P/N M32-6-M-P10M-1-4-000; MELT PRESSURE TRANSDUCER, MERCURY FILLED, Mv/V OUTPUT, 18″ FLEX CABLE, 6-PIN CONNECTOR, 10000 PSI RANGE, THERMOCOUPLE OUT, 6″ STEM LENGTH

Melt Pressure Transducers convert melt pressure into an electrical readout signal.

MPT Melt pressure transducers are mercury-filled melt pressure sensors are suitable to work at high temperature, up to 400°C, assuring a total compliance with the maximum levels of accuracy and of reliability. These pressure sensors output at mV / V output. Theses sensors are also a drop in replacements for other brands. Give us a call for a quote.

• Pressure ranges from: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
• Strain gage Wheatstone bridge
• Accuracy : <±0.25% FSO (H); <±0.5% FSO (M)
• Internally generated 80% calibration signal (R-Cal)
• Fluid-filled system for temperature stability
• Fully interchangeable with all existing brands
• Grade of protection: IP65 (6-pin connector version)
• 1/2-20 UNF, M18x1.5 standard threads; other types available on request
• Standard diaphragm is 15-5 PH stainless steel with GTP coating
• 17-7 PH corrugated diaphragm with GTP coating for ranges below 100 bar-1500 ps
• Other diaphragms available on request

Phoenix Thermal Supply stocks several configuration options. Our sales representatives can help you determine which Melt Pressure Transducer will best fit your application requirements. Contact us